This is a small mod you can use to simulate carbon disk brakes behavior. You'll see the temperature under braking rising very fast, but also dropping fast after you release the pedal, also a little lower efficiency if you keep your brakes too cool.It uses BrakeResponseCurve parameter, so you'll have to delete both BrakeOptimumTemp and BrakeFadeRange parameters.Although this mod uses BrakeGlow parameter, I've noticed it has no effect on brake effective glow appearance.Another thing to notice is, if you need to change the BrakeTorque more then 5%, you may need to adjust BrakeHeating, BrakeCooling and/or BrakeDuctCooling parameters. I use these parameters, with small variations, to race offline GT3, GT1 and LMP cars.I used to use 800C for BrakeOptimumTemp and 600C for BrakeFadeRange to simulate this behavior. I put an image that shows brake efficiency difference, and you'll notice that if you can manage to maintain your brakes in an appropriated temperature range, they'll be more effective than before.==>> This may cause online mismatch
↧